APRS Packet Errors for OE6VAG (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20250701001949OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701004946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701011946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701014946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701021946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701024946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701031946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701034946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701041946OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701044945OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701051945OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH
20250701054945OE6VAG>APMI06,TCPIP*,qAC,T2PERTH:/000000z0000.00N/00000.00E-RX/TX:144.800MHz QTH